Nord SK530P Series AC Inverter for 0.37kW (0.5HP) 230V 1 Ph motor in VxF or Sensorless Vector control to 2.4A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
Operator keypad not included.
Size 2: 66mm Wide x 141mm Deep x 200mm High. IP20.
Weight: 1.2kg.
Output Current: 2.4AOverload: 150% x 60 seconds, 200% x 3.5 seconds
Speed Control Range: 0-400Hz
Braking: Minimum 190 Ohm external resistor (not supplied) - use the 'Which Resistor' button on this page.
2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 2 Digital Outputs, 2 Relay Contact sets, PTC via Digital Input, .
Input Current: 2.4A
Input Voltage: 200V - 240V single phase input, +/-10% 47-63Hz.
EMC Filters: IEC EN61800-3 Class A1 Category C2 (Industrial and Domestic). Leakage can be reduced or filters disabled via jumpers if required.
Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [not specified].
Ventilation space above and below: 100mm.
Ventilation space at sides: 0mm.
Mounting via 5.5mm slotted holes on supplied brackets at rear on 180 x 220mm centres.
Manufacturer part number is SK 500P-370-123-A (275290104).
Download the Nord SK 500P Manual from the link below:-