Parker SSD 890 Series AC Frequency Inverter for 1.5kW (10HP) 230V 3Ph motor to 7A. Operates in VxF, Sensorless Vector control or full closed-loop Flux Vector Control (with optional Encoder Feedback Card). Also Servo Motor Control when resolver card is fitted.
Size B: 72.4mm Wide x 258.5mm Deep x 433.6mm High. IP20.
Weight: 5.1kg.
Overload - 150% x 60 seconds
Speed Control Range: 0-1000Hz (VxF), 0-350Hz (Closed-loop Vector), 0-120Hz (Sensorless Vector). ** A software unlock key from Parker is required to go above 590Hz**. Please contact the sales office if you wich to do this.
Braking - To 36 Ohm minimum external resistor (not supplied) - See the Resistor options linked below or use the 'Which Resistor' button on this page.
Safe Torque Off to SIL3 or PLe level as per EN ISO13849 and EN61800-5-2.
4 Analogue Inputs, 7 Digital Inputs, 2 Analogue Outputs, 2 Digital Inputs/Outputs, 1 Relay Contact Set, USB port for Programming.
Input Current - 10.1A.
Input Voltage: 230Vac ±10% at 50/60Hz
EMC Filters to EN61800-3 to the 2nd Environment (Industrial). See linked products below for external 1st Environment (Domestic) EMC Filter.
Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front - [Not Specified]
Ventilation space above and below - 150mm.
Ventilation space at sides - 0mm (drives can be mounted side by side).
Mounting via 2 x holes at rear (1 top, 1 bottom) on 413.6mm centres.
Mounting onto 35mm DIN rail using included fitting kit.
Heat loss at 3kHz pwm switching frequency: 115W. See the Technical specifications section of the Engineering Manual if using higher switching frequencies.
Full part number is - 890SD-231700B0-B00-1A000.
Download the Parker 890SD Manual and Programming Guide from the links below:-