Yaskawa V1000 Series Cold Plate (Finless) AC Inverter for 0.1kW (0.12HP) 230V 3ph motor to 0.8A at high overload or 0.2kW (0.25HP) to 1.2A when Fan/Pump rated. Operates in VxF or Sensorless Vector control and converts fixed frequency Single Phase 230V input to variable frequency Three Phase 230V for a standard AC Induction motor. This is a fanless design for quiet operation or Installation in ATEX enclosures where rotating components are excluded.
Size: 68mm Wide x 71mm Deep x 128mm High. IP20
Weight: 0.6kg.
Overload: 150% x 60 seconds at its High Overload. rating or 120% x 60 seconds when Fan/Pump Rated.
Speed Control Range: 0.01-400Hz.
Braking - 100% Torque x 12 seconds every 120 seconds to 300 Ohm Minimum, 800 Ohm Maximum external resistor (not supplied) - see the Resistor options linked below or use the 'Which Resistor' button on this page..
2 x Analogue Input, 1 x Analogue Output, 6 Digital Inputs, 1 Pulse Input,1 Pulse Output, 1 Relay Contact set.
'Safe Torque Off' (STO) function to SIL 2.
Input Current: 1.4A at High Overload, 2A when Fan/Pump rated.
Input Voltage: 200-240V Single Phase -15% +10% at 50-60Hz ±5%
EMC Filters: None (see linked products below for external filter)
Mount onto a suitable cooling fin or cold plate in clean environment.
Rated 30°C Ambient, or de-rate up to 50°C.
Ventilation space in front: [not specified], Ventilation space above and below: 100mm, Ventilation space at sides: 30mm.
Heat Loss at max output: 5W to the Cold Plate, 8W from the Electronics and 13.5W total when the carrier frequency is set to 2kHz.
Mounting via 4 x M4 bolts (not supplied) at rear on 56mm x 118mm centres.
Manufacturer part number is CIMR-VCBA0001JAB.
Download the Yaskawa V1000 Manual and Quick Start Guide from the links below:-