Danfoss FC-103 Series AC Inverter for 7.5kW (10HP) 400V 3 Phase Fan or Centrifugal Pump in VxF control to 14.5A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction Motor.
Size A5: 242mm Wide x 200mm Deep x 420mm High. IP55.
Weight: 14.2kg.
Maximum Output Current (380-440Vac): 16A
Maximum Output Current (440Vac-480Vac): 14.5A
Overload: 110% x 60 seconds, 135% x 0.5 seconds.
Speed Control Range: 0-590Hz
Braking: Safe Stop.
Option Slot B: MCB-101 Genera I/O.
Graphical Keypad, 2 Analogue Inputs, 4 Digital Inputs, 1 Analogue Output, 2 Digital Input/Outputs, 2 Relay Contact sets, DC Bus +/- Terminals, Terminals for RS485 Communications.
FC Protocol, N2 Metasys, FLN Apogee communication protocols built-in as standard.
Programmable from a PC via USB and free Danfoss MCT 10 software.
Maximum Input Current (380-440Vac): 14.4A
Maximum Input Current (440Vac-480Vac): 13A
Input Voltage: 380-480V Three Phase ±10% at 50-60Hz ±5%
EMC Compliance: IEC EN55011 First Environment Class C1 (Domestic and Industrial). Motor cables are limited to 10m for C1 compliance. Filter can be disabled if required.
Rated 45°C Ambient.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 0mm.
Heat Loss at max output: 255W
Mounting via 4 x 6.5mm holes at rear on 215mm x 402 centres.
Manufacturer part number is 136X2819.
Full Type code is FC-103P7K5T4E55H1TGXXOXSXXXXAXBKCXXXXD0.
Download the Danfoss FC103 Manual from the links below:-