Eaton DB1 IP20 series AC Inverter for 0.75kW (1HP) 400V three phase motor in VxF or sensorless vector control to 2.2A. Converts fixed frequency three phase 400V input to variable frequency 400V to control the speed of an AC Induction Motor.
Size FS1: 118mm Wide x 174mm Deep x 130mm High. IP20.
Weight: 0.7kg.
Output Current Rating: 2.2A (Continuous)
Overload: 150% x 60 seconds, 175% x 3.75 seconds every 10 minutes.
Speed Control Range: 0-500Hz.
Braking: No Brake.
Efficiency: 97.7 to 96% switching current dependant
No display.
2 Digital Inputs, 2 Analogue/Digital Inputs, 1 Analogue/Digital Output, 1 Relay Contact set.
RJ45 socket for OP bus, Modbus RTU or CANopen communications over RS485.
Input Current: 2.3A
Input Voltage: 380-480V ±10% at 50-60Hz ±5%
EMC Compliance: IEC EN61800-3:2004 Category C2 (Industrial and restricted Domestic).
Cubicle mount.
Rated 50° Ambient.
Mounting via 3 x M4 fixings on 95mm x 99mm centres.
Manufacturer part number is DB1-342D2FN-N2CC. (197196)
Download the Eaton DC1 Manual from the link below:-