Lenze i550 Series AC Inverter for 7.5kW (11HP) 400V 3 Ph motor to 16.5A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor. Operates in standard VxF or Sensorless Vector Control.
Output rating to 16.5A
Overload: 150% x 60 seconds; 200% x 3 seconds.
Size D: 120mm Wide x 130mm Deep x 305mm High. IP20.
Weight: 3.7kg.
Speed Control Range: 0-599Hz
Braking: Internal Brake Switch fitted for use with External Brake Resistor (not supplied)
Braking Switch Limits: Min Resistance: 27 Ohms, Max Brake Current: 29 A. See Linked Products below for resistor or use the ‘Which Resistor’ button on this page.
Supplied with coated PCB's as standard
Input Choke: Optional; Input Current shown without Line Reactor
Input Current: 20A
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±5%
EMC Compliance: IEC 61800-3 Second Environment C2 (Industrial). Filter can be disconnected (Remove IT Screws)
Cubicle mount.
Rated 45°C Ambient.
Ventilation space above and below: 50mm above; 100mm below, at sides: 0mm, in front: [not specified].
Heat Loss at max output: 185W.
Mounting via 4 x 5mm diameter holes at rear on 60mm x 285mm centres (Not DIN Mountable).
Manufacturer part numbers is I5DBE275F10V10000S (Power Module Only).
Download the Lenze i550 Manuals from the links below:-