Vacon 100 Industrial Series AC IP21 Inverter for 55kW (75HP) 525V-690Vac 3 Ph Centrifugal Fan or Pump in VxF or Sensorless Vector control to 62A. Converts fixed frequency three phase 525V-690V input to variable frequency three phase 525V-690V to control the speed of a standard AC Induction motor or permanent magnet synchronous motor.
Graphical Keypad, 2 x Analogue Inputs, 6 x Digital Inputs, 1 x Analogue Output, 3 x Relay Contact set, Modbus RTU (RS485), Modbus TCP (Ethernet).
Options fitted
Slot B: F3,3 Relay board.
Slot C:
Slot D:
Slot E: (SEBJ) Safe Torque Off (STO) / ATEX
DPAP: Safety Guide, Operating Guide (former VACON Installation Manual), guidance on effectively finding all documentation on Danfoss.com.
Manual: English.
Size MR7: 310mm Wide x 310mm Deep x 740mm High. IP21/UL Type 1.
Weight: 38.5kg.
Overload: 110% x 60 seconds every 10 minutes.
Braking: None
Input Current: [as output current]
Input Voltage: 525-690V ±10% Three Phase at 50-60Hz -5% +10%
EMC Filters to IEC EN61800-3 Category C4 for IT networks.
Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in above: 250mm
Ventilation space below: 160mm
Ventilation space at sides: 20mm
Heat Loss at max output: [not specified]
Mounting via 4 x 9mm diameter holes at rear on 645mm x 190mm centres.
Manufacturer part number is VACON0100-3L-0062-7-FLOW+SEBJ+EMC4+DPAP
Download the Vacon 100 Flow Manual and Brochure from the links below:-