WEG TDP500 Series - 280A 2 Quadrant DC Thyristor Drive for 230-500V Supply with 110V or 230V Control supply (universal).
Typical Motor output - up to 115kW (155HP) at 460V DC for motor speed and torque control.
Keypad fitted
Frame Size B - 312mm Wide x 347mm Deep x 395mm High.
Terminals include:-
3 x Analogue Inputs (12 bit, programmable, selectable for ±10 Vdc, 0 ... 20 mA, 4 ... 20 mA)
2 x Analogue Outputs (±10 Vdc)
4 x Digital Inputs – programmable (0-24 Vdc PNP/NPN, opto-isolated)
4 x Digital Outputs – programmable (0-24 Vdc PNP/NPN, opto-isolated)
2 x Relay Outputs – 1: drive OK (250 Vac - 1 A), 1: programmable (250 Vac - 1 A)
Thermistor (PTC according to DIN 44081 o 44082)
+ & - 10V @10mA Voltage Reference for potentiometers.
Control 24V 200mA
Internal Armature Voltage AVF (ARM) Feedback, Tacho and Encoder included as standard.
Communication:RS485 port (Modbus RTU), Ethernet port (Modbus TCP) , Optional: PROFINET, PROFIBUS, EtherNet/IP
Feedback:
Tachogenerator (± 22.7 Vdc to 302.9 Vdc)
2 digital incremental TTL 5 Vdc /HTL 15 ... 24 Vdc, channels A-B-Z, opto-isolated
Encoder power supply 5.2 ... 6.5 Vdc (TTL) - 24 Vdc (HTL)
Aux supply: 115 / 230Vac ±10%, 50/60 Hz ±5%
Input Current - 229A for Armature + up to 20A for Field.
Input Voltage – 230V to 500V three phase +-10% at 50/60Hz.
Input fuse – 300A - to suit input bridge refer to manual
Note. The 3 phase Field and Armature supplies are input through separate terminals and may be at different levels if desired.
Use a choke in the supply at 40uH @ 216A
Ventilation: Force Vented
Fan Supply source: Control Supply fed
Rated at 40C Ambient.
Ventilation space above - 150mm.
Ventilation space below - 150mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 781W.
Panel mount with fixings on 275mm x 375mm centers.
Full part number is TPD500-00280-2B-B (18429745)
Download the Technical product Manual from the link below...