Siemens Innomotics 1CV3164B Cast Iron Premium Efficiency (IE3) 15kW 4 Pole 3 phase AC Motor.
160L Frame, B3 Foot Mount with top mounted terminal box.
**Please check motor specification and part number before ordering as the part cannot be returned or cancelled once ordered***
Power: 15kW at 400V or 690V 50Hz.
Speed: 1465rpm at 50Hz.
Torque: 98.0Nm at 50Hz.
Full Load Current with links in DELTA (400V 3ph): 28.5A
Full Load Current with links in STAR (690V 3ph): 16.4A.
Power Factor: 0.83 when mains connected at 50Hz.
Efficiency: 92.1% (IE3) at 50Hz.
Options:
F74 Sheet steel fan cowl
M11 Stainless steel rating plate
L23 Regreasing system
S02 Special paint finish C3
Set terminal box links 'three a-breast' for 400V 'Delta' connection. Delta connection is required when using a 400V three phase AC Inverter or when connected directly to a 400V three phase mains supply.
Set terminal box links ‘two at one side’ for 690V 'Star' connection.
IIC411 - self ventilated, surface cooled
314mm Wide x 656mm Long x 425mm High. (Overall dimensions including shaft)
Foot mount on 15mm holes with 254mm wide x 254mm centres 108mm back from shaft shoulder.
Shaft: 42mm diameter x 110mm long.
Motor Housing: Cast Iron.
Type of terminal box TB1 J01
Contact screw thread 6xM5
Max. cross-sectional area 16.0 mm2
Main cable entry 2xM40x1.5
Main cable gland 2 plugs
Auxiliary cable entry 1xM16x1.5
Auxiliary cable gland 1 plug
Weight: 129kg.
Environmental conditions : -20 °C - +40 °C / 1000 m
Thermistors: 1 per phase
Bearings: Ball Bearings. Type: 6309 Z C3(Drive End). 6209 Z C3(NDE)
Part number: 1LE1603-1DB43-4AB4
Drawing and data sheet downloads:
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.