TEC Electric 0.37kW 3ph 4 Pole B35 Foot and Flange 71 Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Output: 0.37kW at 1400rpm, 230V or 400V, 50Hz 3ph.
Speed Range from Inverter Supply: From 140rpm to 1680rpm for 5Hz to 60Hz control, with suitable de-rating at the lower speeds.
Fitted with Electronic Holding brake and emergency hand release handle
Brake Torque 6Nm
Brake Voltage: 205Vdc. (Full wave rectifier)
As Default the brake is connected to one phase and the star point in the motor terminal box which gives the 205Vdc required. However if used with an AC Inverter these brake connections must be connected to a separate 230V 1ph supply to operate the brake as the AC Inverter output is not suitable.
Full Load Current with links in Delta for 230V 3ph: 1.74A.
Full Load Current with links in Star for 400V 3ph: 1.01A. (Default).
Torque: 2.52Nm
Power Factor: 0.73 when mains connected at 50Hz.
Efficiency: 72.7% (IE2)
Terminal box position: Top (default), sides (move feet).
Enclosure rating: IP55
160mm Wide x 303mm Long (Including shaft and brake) x 188mm high overall (Including terminal box and brake handle)
Foot mount on 7mm holes at 112mm wide x 90mm centres 45mm back from the shaft shoulder: Flange mount on 4 x 10mm holes equispaced on 130mm PCD with 110mm diameter spigot in the 160mm diameter flange
Shaft: 14mm diameter, 30mm long with 5mm key
Construction: Aluminium with removable feet.
Weight is 8kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part Number: 0.3743TECAB35-71-IE2-BM Frame Reference: T2AB-712-4-B35