Marelli - High Efficiency 80 Frame 1.1kW 3ph 2 Pole Foot Mounting AC Motor for 230V or 400V x 50Hz 3 phase supply. Use with any Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
SPECIAL PRICE AVAILABLE FOR STOCK ONLY
Fixed mains supply output: 1.1kW (1.5HP) x 2860RPM at 230V or 400V x 50Hz 3ph
Inverter supply output: 12:1 Speed Control range from 286RPM to 3432RPM for 5Hz to 60Hz with suitable de-rating at the lower speeds.
Full Load Current - 4.26A at 230V, or 2.46A at 400V.
Power Factor is 0.81 when mains connected at 50Hz.
Efficiency is 79.8% at full load, 80.1% at 75% load and 76.5% at half load.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
Terminal box for 1 x M20 Gland
158mm Wide x 290mm Long x 220mm high overall in its IP55 enclosure.
Foot mount on 10mm holes at 125mm wide x 100mm centres 50mm back from shaft shoulder.
Shaft is 19mm dia x 40mm with 6mm wide key.
Weight is 10kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Part number is - MAQ80MB2 B3
For Variable Speed use:-
Part Time Output when Inverter powered is...
3.06Nm - 1.1kW (1.5HP) x 3432RPM at 60Hz
3.67Nm - 1.1kW (1.5HP) x 2860RPM at 50Hz
3.67Nm - 0.55kW (0.75HP) x 1430RPM at 25Hz
3.67Nm - 0.11kW (0.15HP) x 286RPM at 5Hz
Continuous Output when Inverter powered is...
3.06Nm - 1.1kW (1.5HP) x 3432RPM at 60Hz
3.67Nm - 1.1kW (1.5HP) x 2860RPM at 50Hz
3.12Nm - 0.47kW (0.627HP) x 1430RPM at 25Hz
1.84Nm - 0.055W (0.074HP) x 286RPM at 5Hz
Download the Dimensions and MAQ Motor Technical Catalogue from the link below...
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.