TEC Electric Aluminium 1.1kW 3ph 6 Pole Premium Efficiency (IE3) B34 Foot and Face 90L Frame AC Motor for 230V or 400V 3 phase supply.
Suitable for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz/60Hz.
Rating: 1.1kW at 950RPM, 230V or 400V 3ph 50Hz.
Inverter Speed Control range from 95RPM to 1330RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Fitted with Electronic Holding brake and emergency hand release handle
Brake Torque: 16Nm
Brake Voltage: 205Vdc. (Full wave rectifier)
As Default the brake is connected to one phase and the star point in the motor terminal box which gives the 205Vdc required. However if used with an AC Inverter these brake connections must be connected to a separate 230V 1ph supply to operate the brake as the AC Inverter output is not suitable.
Full Load Current: 5.07A at 230V (DELTA) or 2.93A at 400V (STAR)
Power Factor: 0.67 when mains connected at 50Hz.
Efficiency: 81% at 50Hz.
Full Load Torque: 11Nm
176mm Wide x 397mm Long x 231mm High (Including terminal box)
Foot mount on 10mm holes at 140mm wide x 125mm centres 56mm back from the shaft shoulder: Face mount on 4 x M8 tapped holes at 115mm PCD with 95mm diameter register in the 140mm diameter flange
Shaft: 24mm diameter, 50mm long with 8mm key
IP55
Weight: 20.54kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number: 1.163TECAB34-IE3-BM. Frame Reference: T3AB 90L6B
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.