TEC Electric 0.12kW 3ph 4 Pole B35 Foot and Flange 63 Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Output: 0.12kW at 1395rpm, 230V or 400V, 50Hz 3ph.
Speed Range from Inverter Supply: From 139rpm to 1674rpm for 5Hz to 60Hz control, with suitable de-rating at the lower speeds.
Fitted with Electronic Holding brake and emergency hand release handle
Brake Torque 4Nm
Brake Voltage: 205Vdc. (Full wave rectifier)
As Default the brake is connected to one phase and the star point in the motor terminal box which gives the 205Vdc required. However if used with an AC Inverter these brake connections must be connected to a separate 230V 1ph supply to operate the brake as the AC Inverter output is not suitable.
Full Load Current with links in Delta for 230V 3ph: 0.77A.
Full Load Current with links in Star for 400V 3ph: 0.44A. (Default).
Torque: 0.82Nm
Power Factor: 0.65 when mains connected at 50Hz.
Efficiency: 60.1% (IE2)
Terminal box position: Top (default), sides (move feet).
Enclosure rating: IP55
140mm Wide x 266mm Long (Including shaft and brake) x 171mm high overall (Including terminal box and brake handle)
Foot mount on 7mm holes at 100mm wide x 80mm centres 40mm back from the shaft shoulder, Flange mount on 4 x 10mm holes equispaced on 115mm PCD with 95mm diameter spigot in the 140mm diameter flange
Shaft: 11mm diameter, 23mm long with 4mm key
Construction: Aluminium with removable feet.
Weight is 5kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part Number: 0.1243TECAB35-63-IE2-BM Frame Reference: T2AB-631-4-B35