WEG W22 Mining 30kW 380V/690V 4 Pole 200L Frame B5 IP66 WFF2 IE3

WEG W22 IE3 WFF2 30 kW 4 pole  200L IP66 Mining 3 phase motor

Power: 30kW at 400V or 690V 50Hz.
Speed: 1480rpm at 50Hz.
Torque: 193Nm at 50Hz.
Full Load Current with links in DELTA (400V 3ph): 57.1A
Full Load Current with links in STAR (690V 3ph): 33.1A.
Power Factor: 0.81 when mains connected at 50Hz.
Efficiency: 93.6% (IE3) at 50Hz.

Painting Plan 203A (C3 according to ISO 12944) Finish Color: Munsell 2.5 YR 6/14
Internal Tropicalized Painting 
With Grease Nipples (D.E and N.D.E.)
Thermistor 155ºC - Shutdown - Winding
Additional Terminal Box: With Thread 1xM20x1,5 With Terminal Block - 6 Pins
With Routine Test – Unwitnessed – Whole Batch
With Additional Plate for TAG Numbers
Sealing:Labyrinth W3Seal Brass
Certification CSA Safe/UL Safe/CE/EAC/UKCA Balancing: Normal with 1/2 Key
Single grounding
Flange FF (IEC) or D (NEMA) - Standard Size

IP66 TEFC (Totally Enclosed Fan Cooled) IC411. (Fan will rotate the same speed as the motor shaft)
531.5mm Wide  x 765.5mm Long x 528mm High. (Overall dimensions including shaft)
Flange mount on 4 x 19mm holes spaced on 350mm PCD with 300mm diameter spigot in the 400mm diameter flange.
Shaft: 55mm diameter x 110mm long.
Motor Housing: Cast Iron.
Weight: 274kg.

Rated at -20 to 40C Ambient. (Ventilation space required for air intake)
Thermistors: 1 per phase
Insulation class H
Bearings: Ball Bearings. Type: 6312 C3(Drive End). 6212 C3(NDE)

Extended Warranty Available: When purchased with a WEG AC Inverter (see linked products below) the warranty for the motor and the AC Inverter can be extended to 3 years. Terms and Conditions apply, registration process is required.

Part number: 16933624

Drawing and data sheet downloads: