Delta ASDA-E3 Servo Drive controller Series for a 400W x 230V ECM-E3 Servo Motor.
Power Stage Input Voltage: 200V to 230V -15% +10% 1 or 3 Phase, via Class T 10A Fuses.
Electronics Input Voltage: 200V to 230V -15% +10% 1 Phase.
Output Current: 2.65A continuous.
Peak Output Current: 10.6A to 100% RMS.
Input Current: 3.7A x 1ph or 2A x 3ph.
Features: -
Inputs/Outputs: 4 x 24V Digital Inputs, 1 x Analogue Inputs,6 x Digital Outputs, 2 x Analogue Outputs, Pulse Input with sign, A, B and Z Line Driver Outputs.
Sockets: Terminal Interface, EtherCat, STO, Encoder and Mini USB for PC.
Communications: RS-485,RS-432,USB/ETHERCAT
Drive Resolution: 24 bit (16,777,216 ppr).
Tuning Mode: Auto / Manual.
Braking: To 60 Ohm Minimum, 135 Ohm Maximum external resistor (not supplied). See the Resistors linked below,
Position Control Mode: Pulse and Direction and E Gear Ratio.
Speed Control Mode: 10-0-10V Analogue Command to 12 bit Resolution, 6,000:1 Control Range and 2.5kHz Bandwidth.
Torque Control Mode: 0-10V Analogue Command or Parameter.
Bandwidth: 2.5kHz maximum.
Protection: Overcurrent, Overvoltage, Undervoltage, Overheat, Regeneration error, Overload, Excessive
speed deviation, Excessive position deviation, Encoder error, Adjustment error, Emergency
stop, Forward / reverse limit error, Serial communication error, RST leak phase, Serial
communication timeout, Short-circuit protection for terminals U, V, W
Dimensions: B3-M/F Size, 90mm Wide x 205mm Deep x 225mm high.
Weight: 0.9kg.
Enclosure: IP20.
Ambient Temperature: 45C below 2000m ASL.
Part Number: ASD-E3-0421-E