Marelli - 230V Single Phase Motor - 1.1kW (1.5HP) Cap Run 2P 80F Flange

MYA80MB2 B5

Order Code: 23493
Photo of Marelli - 230V Single Phase Motor - 1.1kW (1.5HP) Cap Run 2P 80F Flange
No Longer Available
This item is no longer available from us. Alternatives may be available - see linked products below.

Brand: Marelli, Range: MYA Single Phase Cap Run

Marelli MYA Series 80 Frame 1.1kW (1.5HP) Flange Mounting Single Phase Capacitor Run (Permanent Capacitor) 2 Pole AC Motor for use at fixed Speed.

Use with a fixed frequency 1ph input at 230V x 50Hz for 1.1kW (1.5HP) x 2800RPM.

Low starting torque at 70%.
Full Load Current - Not specified.
Starting Current - Not specified.

B3 Flange mounting:-
200mm Wide x 290mm Long x 243mm high overall in its IP55 enclosure.
Flange mount on 4 x 12mm holes at 165mm PCD with 130mm diameter spigot in the 200mm diameter flange.
Shaft is 19mm dia x 40mm with 6mm wide key.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.

Full part number is - MYA80MB2 B5 (MYA 80 MB1 B5)