Marelli - 230V Single Phase Motor 0.75kW (1HP) Cap Run 4P 80F Foot/Flange

MYA80MB4 B35

Order Code: 23526
Photo of Marelli - 230V Single Phase Motor 0.75kW (1HP) Cap Run 4P 80F Foot/Flange
No Longer Available
This item is no longer available from us. Alternatives may be available - see linked products below.

Brand: Marelli, Range: MYA Single Phase Cap Run

Marelli MYA Series 80 Frame 0.75kW (1HP) Foot and Flange Mounting Single Phase Capacitor Run (Permanent Capacitor) 4 Pole AC Motor for use at fixed Speed.

Use with a fixed frequency 1ph input at 230V x 50Hz for 0.75kW (1HP) x 1400RPM.

Low starting torque at 70%.
Full Load Current - Not specified.
Starting Current - Not specified.

B35 Foot and Flange mounting:-
200mm Wide x 290mm Long x 243mm high overall in its IP55 enclosure.
Foot mount on 10mm holes at 125mm wide x 100mm centres 50mm back from shaft shoulder.
Flange mount on 4 x 12mm holes at 165mm PCD with 130mm diameter spigot in the 200mm diameter flange.
Shaft is 19mm dia x 40mm with 6mm wide key.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.

Full part number is - MYA80MB4 B35 (MYA 80 MB4 B35)