Marelli - 230V Single Phase Motor 0.75kW (1HP) Cap Run - 2P 71F Foot/Flange

MYA71MC2 B35

Order Code: 23465
Photo of Marelli - 230V Single Phase Motor 0.75kW (1HP) Cap Run - 2P 71F Foot/Flange
No Longer Available
This item is no longer available from us. Alternatives may be available - see linked products below.

Brand: Marelli, Range: MLA Single Phase Cap Start

Marelli MYA Series 71 Frame 0.75kW (1HP) Single Phase Capacitor Run (Permanent Capacitor) 2 Pole AC Motor for use at fixed Speed or variable speed with a suitable Inverter drive.

Use with a fixed frequency 1ph input at 230V x 50Hz for 0.75kW (1HP) x 2800RPM.

Low starting torque at 70%.
Full Load Current - Not specified.
Starting Current - Not specified.

B35 Foot and Flange mounting:
145mm Wide x 255mm Long x 123mm high overall in its IP55 enclosure.
Foot mount on 7mm holes at 112mm wide x 90mm centres 45mm back from shaft shoulder.
Flange mount on 4 x 10mm holes at 130mm PCD with 110mm diameter spigot in the 160mm diameter flange.
Shaft is 14mm dia x 30mm with 5mm wide key.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.

Full part number is - MYA 71 MC2 B35 (MYA71MC2 B35)