TEC ML2 IE2 Single Phase AC Motor, Cap Start 230Vac 2.2kW, 4 Pole, 100 Frame, B34 Mount

TEC ML IE2 Aluminium 2.2kW Single Phase 4 Pole B34 Foot and Face mount 100 Frame AC Motor for 230V 50Hz Single phase supply.  
Suitable for fixed speed operation. Fitted with a Run Capacitor and Start Capacitor for high starting torque applications. (See low torque alternative linked below) 

Rating: 2.2kW at 1460rpm, 230V 50Hz.
Full Load Current: 11.45A
Starting Current: 69.48A (6.07 x full load current) 
Rated Torque: 14.39Nm
Starting Torque: 33.2Nm (231% of Rated Torque)
Power Factor: 0.982
Efficiency: 85% 

Run Capacitor: 50uF

200mm Wide x 375mm Long (including shaft) x 276mm High (including terminal box)
Foot mount on 12mm holes at 160mm wide x 140mm centres 63mm back from the shaft shoulder: Face mount on 4 x M8 tapped holes at 130mm PCD with 110mm diameter register in the 160mm diameter flange
Shaft is 28mm dia x 60mm with 8mm wide key

IP55
Weight: 31kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.

Manufacturer Part Number: 2.241TCCB34-IE2. Frame Reference: ML2 100L1-4B34