TEC Force Ventilation Fan for 71 Frame Motor, 230V/400V 3ph

TEC Force Cooling Kit (known as a 'Force Vent Kit') for use with a 71 Frame Aluminium or Cast Iron Motor.

Replaces the existing fan cowl and shaft mounted fan of an AC motor to provide IC416 form of cooling (Totally Enclosed Over-Blown), while maintaining its IP55 degree of protection.
Allows an Inverter Drive controlled AC Motor to be run continuously at low speeds, without de-rating.
Also allows for high speed use, when a shaft mounted fan would otherwise absorb excessive power, at increased noise level.

Supply Required: Three phase 230V/400V at 0.065A
Supply Load: 25W
Speed: 2800RPM
Air Volume: 52m³/Hr at 50Pa
Noise: 62dBA
Enclosure Rating: IP55

Dimensions: 138mm inside diameter, 140.4mm o.d. x 164mm long.  Adds 90mm to the length of a standard motor.
Mounting: via 8 x slots 5mm wide x 14mm

Manufacturers Part Number: 71-FORCEVENT (Also known as G-71B2, FV-71B or G-71B)