Nord SK510E Nordac Pro series AC Inverter for 0.37kW (0.5HP) 230V 3 Ph motor in VxF or Sensorless Vector control to 2.2A. Converts fixed frequency single or three phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor.
⛔ SK 510E has been replaced by the SK 530P - see linked products below. The SK510 E is being phased out before becoming obsolete by 2028. It is still available but it built to order and is no longer considered a current product. ⛔
Dimensions: Size 1 74mm Wide x 153mm Deep x 186mm High (excluding mounting brackets).
Enclosure Rating: IP20.
Weight: 1.4kg.
Overload: 150% x 60 seconds, 200% x 3.5 seconds
Speed Control Range: 0-400Hz
Braking (DBr): to Minimum 190 Ohm external resistor (not supplied), see the Linked Products below or use the 'Which Resistor' button on this page.
Operator Keypad: None, see linked products below for options.
Features: 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 2 Relay Contact sets, DC Bus Terminals, 1 x RJ12 port for RS232/RS485 (USS or Modbus RTU) communications.
Input Current: 4.8A (Single Phase), 3.1A (Three Phase).
Input Voltage: 200V-240V Single or Three Phase ±10% at 50-60Hz ±5%.
EMC Filters: IEC EN61800-3 Class B Category C1 (Industrial and Domestic). Leakage can be reduced or filters disabled via jumpers if required.
STO: Includes Safety Terminal Block for STO operation. Terminals are linked as standard, for STO operation links must be removed.
Mounting: Cubicle mount Mounting via 2 x 5.5mm slotted holes x 220mm centres on supplied brackets at rear.
Ambient: Rated 40°C.
Ventilation space above and below: 100mm, at sides: 0mm, in front: [not specified].
Heat Loss; 19W at maximum output.
Part Number: SK510E-370-323-A. Sometimes specified as 275710037. (SK 510E-370-323-A)
Download the Nord SK 500E Manual from the link below:-