Danfoss FC-202 Aqua AC Inverter for 4.0kW (5HP) 400V 3 Phase Fan or Centrifugal Pump in VxF control to 10A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction Motor.
***Special purchase if ordered cannot be returned unless under warranty***
Size A2 (E20): 268mm High x 90mm Wide x 205mm Deep without options. IP20.
Standard cable entries
Weight: 5.4kg.
Overload: 110% x 60 seconds, 135% x 0.5 seconds.
Speed Control Range: 0-590Hz
Braking: None
Graphical Keypad, 2 Analogue Inputs, 4 Digital Inputs, 1 Analogue Output, 2 Digital Input/Outputs, 2 Relay Contact sets, 2 Pulse Inputs.
Field Bus: FC Protocol, Modbus RTU.
Programmable from a PC via USB and free Danfoss MCT 10 software.
Input Current: 9A(9.9A)
Input Voltage: 380-480V Three Phase ±10% at 50-60Hz ±5%
EMC Compliance: IEC EN55011 EN61800-3 First Environment (H3) Class A1/B C1 (Domestic and Industrial). Can be disabled if required.
Wall mount in clean environment or cubicle mount.
Rated 50°C Ambient.
Ventilation space in front: [not specified], above and below: 10mm, at sides: 0mm.
Mounting via 4 x holes at rear on 70mm x 257 centres.
Heat Loss at max output: 124W
Typecode: FC-202P4K0T4E20H3XGXXXXSXXXXAXBXCXXXXDX (131B8930)