Danfoss FC-202 'Aqua' Series AC Inverter for 7.5kW in Heavy Duty Mode or 11kW in Fan/Pump Mode. Converts fixed frequency three phase 380-480Vac input to variable frequency three phase 400V to control the speed of a standard AC Induction Motor.
Input Voltage: 380Vac - 480Vac Three Phase ±10% at 50-60Hz ±5%.
Input Current: (380-440Vac) 32A in Heavy Duty Mode. 37.5A in Fan/Pump Mode.
Size B1: 242mm Wide x 260mm Deep x 48mm High. IP55.
Net Weight: 21kg.
Output Current: 380-440VAc: 16A in Heavy Duty Mode 24A In Fan/Pump Mode.
Output Current: 441-500VAC: 14.5A in Heavy Duty Mode, 21A in Fan/Pump Mode.
Overload, Heavy Duty: 150% x 60 seconds.
Overload, Fan/Pump Duty: 110% x 60 seconds, 135% x 0.5 seconds.
Speed Control Range: 0-590Hz
Braking: None.
Graphical Keypad, 2 Analogue Inputs, 4 Digital Inputs, 1 Analogue Output, 2 Digital Input/Outputs, 2 Change Over Relays, DC Bus +/- Terminals, Terminals for RS485 Communications.
FC Protocol, N2 Metasys, FLN Apogee communication protocols built-in as standard.
Programmable from a PC via USB and free Danfoss MCT 10 software.
EMC Compliance: IEC EN55011 First Environment Class C1 (Domestic and Industrial). Can be disabled if required.
Wall mount in clean environment or cubicle mount.
Rated 45°C Ambient.
Ventilation space in front: [not specified], above and below: 200mm, at sides: 0mm.
Heat Loss at max output: 291W in Heavy Duty Mode. 392W in Fan/Pump Mode.
Mounting via 4 x holes at rear on 210mm x 454centres.
Manufacturer part number is 131N0329
Type code is FC-202P11KT4E55H1XGXXOXSXXXXAXBXCXXXXDX
Download the Danfoss FC202 Manual from the links below:-