Bosch Rexroth EFC 5610 Series AC Inverter for 22kW (30HP) 400V 3 Ph motor to 45A at High Overload or 30kW (40HP) to 60.8A when Fan/Pump rated. Operates in standard VxF or Sensorless Vector Control and converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
Size G: 165mm Wide x 241mm Deep x 313mm High. IP20.
Weight: 8.5kg.
22kW, 45A with 150% overload for 60 seconds (High Overload) - Default Rating
30kW, 60.8A with 120% overload for 60 seconds (Fan/Pump rated) - Change Parameter C0.01 to 0
Speed Control Range: 0-400Hz
Dynamic Braking (DBr): 100% duty to minimum 28 Ohm external resistor (not supplied) - see the linked products below or use the 'Which Resistor' button on this page.
Supplied with Sytronix Firmware Option
Removable Keypad included, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 1 Open Collector, 1 Relay Contact set, DC Bus +/- Terminals, Terminals for RS485/Modbus communications, Mini-USB Port.
Input Current: 52.7A at High Overload, or 59.3A when Fan/Pump rated.
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±5%
EMC Compliance: IEC 61800-3 Second Environment C3 (Industrial).
Cubicle mount.
Rated 45°C Ambient.
Ventilation space above and below: 125mm, at sides: 0mm, in front: [not specified].
Heat Loss at max output: 745W.
Mounting via 4 x 6.5mm diameter holes at rear on 140mm x 300mm centres.
Manufacturer part number is EFC5610-22K0-3P4-MDA-7P-FCPNN-NNNN or R912007033.
Replaces the IndraDrive Fc where the application permits.