Vacon NXP IP21 High Performance AC Frequency Inverter for 11kW (10HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 23A at high overload, or 15kW (20HP) to 32A when Fan/Pump rated. Simple to set up for a standard AC Induction motor.
Frame 5: 144mm Wide x 214mm Deep x 391mm High, IP21 / NEMA1.
Overload - 200% Output Current x 2 seconds and 150% x 60 seconds at High Overload, 110% Output Current x 60 seconds when Fan/Pump rated.
Speed Control Range - 0-320 Hz (standard).
Features - 2 Analogue Inputs, 6 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 2 Relay Contact sets.
A Slot: 6DI,DO,2AI,1AO,+10Vr,+24V
B Slot: 2RO(NO/NC)
C Slot: No board
D Slot: No board
E Slot: No board
Coated PCB's
Parameter setting via keypad or from a PC using 'NCDrive' software (RS232C cable required - optional).
Alpha Numeric Display included.
Brake Chopper included. Minimum resistance 21 ohm. Maximum current 17A.
Input Current - as output current.
Input Voltage - 380-500V -10%/+10% at 50-60Hz (± 10%)
EMC IEC61800-3 for IT Networks
Wall mount using 4 x 7mm holes at rear.
Rated at 40°C Ambient.
Ventilation space required above: 120mm
Ventilation space required below: 60mm
Ventilation space at sides: 20mm
Full part number is - NXP00325-A2T1SSV-A1A2000000 (NXP00325A2T1SSVA1A2000000)
Download the Vacon NXP Manual from the link below:-