Danfoss FC-102 Series AC Inverter for 18.5kW (20HP) 525-690V 3 Phase HVAC Drive for Fan or Centrifugal Pump in VxF control to 23A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction Motor.
Size B2: 650mm hign x 242mm wide x 260mm deep.
Weight: 27kg..
Output Curent 525-550Vac: 23A.
Output Current: 551-690Vac: 22A.
Overload: 110% x 60 seconds, 135% x 0.5 seconds.
Speed Control Range: 0-590Hz
Braking: None.
Graphical Keypad, 2 Analogue Inputs, 4 Digital Inputs, 1 Analogue Output, 2 Digital Input/Outputs, 2 Relay Contact sets, DC Bus +/- Terminals, Terminals for RS485 Communications.
FC Protocol, N2 Metasys, FLN Apogee communication protocols built-in as standard.
Programmable from a PC via USB and free Danfoss MCT 10 software.
Input Current: 24A
Input Voltage: 525-690V Three Phase ±10% at 50-60Hz ±5%
EMC Compliance: IEC EN55011 RFI Class A" (C3) 2nd envronment, Industrial.
Wall mount in clean environment or cubicle mount.
Rated 45°C Ambient.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 0mm.
Heat Loss at max output: 335W
Mounting via 4 x holes at rear on 70mm x 257mm centres.
Manufacturer part number is 134L2779.
Full Type code is FC-102P18KT7P55H5XGCXXXSXXXXAXBXCXXXXD0 .
Download the Danfoss FC102 Manual from the links below:-