TEC 132 Frame - 11kW 3ph 2 Pole IE1 S2 rated AC Motor for 400V or 690V 3 phase supply. Use with 400V Variable Frequency Drives or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 11kW (15HP) x 2930RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 293RPM to 4102RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Fixed mains supply output is 11kW (15HP) x 2930RPM at 400V x 50Hz 3ph.
Full Load Current - 20A at 400V.
Power Factor is 0.9 when mains connected at 50Hz.
Efficiency is 88.4% at full load.
252mm Wide x 475mm Long x 318mm high overall in its IP55 enclosure.
Mount via 4 x 12mm holes on 216mm x 178mm centres, 89mm back from the shaft shoulder.
Shaft is 38mm diameter x 80mm long with a 10mm wide keyway.
Weight is 52.5kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
For Variable Speed use:-
Part Time Output when Inverter powered is...
25.61Nm - 11kW ( 14.75HP) x 4102 RPM at 70 Hz
35.80Nm - 11kW ( 14.75HP) x 2930 RPM at 50 Hz
35.80Nm -5.5kW ( 7.37HP) x 1465 RPM at 25 Hz
35.80m - 1.1kW ( 1.47HP) x 293 RPM at 5 Hz
Continuous Output when Inverter powered is...
25.61Nm - 11kW ( 14.75HP) x 4102 RPM at 70 Hz
35.80m - 11kW ( 14.75HP) x 2930 RPM at 50 Hz
30.48Nm - 4.68kW ( 6.27HP) x 1465 RPM at 25 Hz
17.93Nm - 0.55kW ( 0.74HP) x 293 RPM at 5 Hz
Full part number is - 11.023TECAB3-132-S2
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.