ABB IE3 7.5kW three phase 2 pole B3 Foot mounting 132S frame AC Induction Motor for 400V 3 phase supply.
Output: 7.5kW 2909rpm 400V 50Hz
Speed Range from an Inverter Supply: From 5 Hz, 291rpm to 77 Hz, 4480rpm.
If operated for long periods of time below 25Hz then the motor rating will be reduced.
Constant Power Speed Range: 2915rpm to 4500rpm continuously.
Full Load Current with links in Δ (Delta) 400V 3ph: 13.1A.
Full Load Current with links in Y (Star) 690V 3ph: 7.6A.
Torque: 24.6Nm at 50Hz.
Efficiency: 90.1% (IE3)
Power Factor: 0.9 at 50Hz.
Terminal box position: Top.
Enclosure rating: IP55.
Dimensions: 262mm wide x 487mm long x 298mm high overall.
Mounting: Foot mount on 15mm holes on 216mm x 140/178mm centres 89mm back from the shaft shoulder.
Feet: Fixed
Shaft: 38mm diameter, 10mm wide key, 80mm long.
Construction: Aluminium
Weight: 63kg.
Ambient Temperature: Rated to 40°C.
Ventilation space is required at rear cooling air intake.
Over-Temperature Detection: Not Fitted
Bearings: Ball Bearing, 6208-2Z/C3 (DE), 6206-2Z/C3 (NDE).
IE2 rated motor must be used with an AC Inverter. Suitable for use with a Variable Frequency Inverter Drive having 1ph** or 3ph input and 3ph output.
Motor Type: M3AA 132SC 2
Product Code: 3GAA131130-ADK-7.5kW
Download the Dimensions and Technical Catalogue from the link below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.