ABB DCS880 184A 2Q 100V to 415V 3ph AC to DC Converter

ABB DCS880 Series 184A 2 Quadrant Regenerative DC Thyristor Drive and Field Controller from 100V to 400V Supply.

Output Current: 184A Continuous.
Field Output Current: 1 -18A.
Overload: 150% x 60 seconds every 15 minutes.
Typical Motor Output: Up to 217kW (291HP) at 460V DC for motor speed and torque control.

Dimensions: Frame Size H2: 370mm high x 270mm wide x 271mm deep. IP00.
Weight: 16kg.

Terminals include:-
3 x Analogue Inputs (Selectable -20mA to 20mA, +/- 10V (11Bit +sign).
2 x Analogue Outputs (Selectable 0 to 20mA, 0 to 10V).
6 x Digital Inputs – Sink/ource, 1  can be used for PTC.
2 x Digital Inputs/Outputs – Programmable as outputs or pulse input/outputs.
3 x Relay Outputs.
Safe Torque Off (XSTO) anMain Contactor Shutdown (XSMC).
Drive to Drive Link (XD2D) and Built in Modbus EIA-485.
Encoder Differential or Single ended.
Tacho feedback included 5V +/- 8 to 270Vdc.
Input Output extention models and communications options are linked below or are available on request.

Input Voltage: 100V to 480V three phase +-10% at 50/60Hz. +/- 15% short duration.
Input Fuse: 250A x High Speed Thyristor protection.
Input Choke: 1% to 4% line choke is required.

Auxiliary Supply: 115V or 230V single phase for electronics and 230V single phase for the Fan Supply.
Clearance above: 250mm. Below: 150mm. At each side: 10mm.

Part number: DCS880-S01-0180-04.

Download the Technical Product Manual from the link below...